Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
LED indication
Red
Yellow
GET Ready
Micropower Group GET App
The unit has Near Field Communication
(NFC) and can communicate with compatible
iOS-/Android devices.
1. Download the Micropower Group GET App
from Google Play Store or App Store.
2. Activate NFC on the current iOS-/Android
device.
3. Put the iOS-/Android device on the unit's NFC
symbol.
For further information, refer to GET App
information on the Micropower Support Center.
(https://docs.micropower-group.com/)
GET Cloud
Connect wirelessly to GET Cloud for fleet
management and additional smart services. For
further information about the GET system, see
Micropower Support Center, or contact your local
Micropower Representative.
8
Green
Blue
Information
Charger not connected to mains.
Mains connected. Waiting for battery.
A battery is connected to the charger and charging is in
progress.
A battery is connected, but charging is paused (due to settings
in the Time restriction, Remote in function, or during a BMU
initialization).
Charging completed.
The charging process has been manually stopped. Press ESC
to resume charging.
Equalize charging in progress.
Watering in progress. Watering can be active without this
indication.
An indication request has been sent from Service Tool.
Charger is in bootloader mode. Wait until charger automatically
restarts.
An alarm is active.
Software malfunction
Off
On
Flashing
Parameter settings
CAUTION
Incorrect settings of the battery charger may dam-
age the battery. Always check settings before
start charging.
Check settings
NOTE
When the battery charger is configured for Battery
Management System (BMS) control, please
check the CAN setting.
Navigate in the charger's display as follows:
1. Press OK.
2. Go to [Service] using arrow down.
3. Press OK.
4. Go to [Charging param] or [CAN] using arrow
down.
5. Press OK.
Current settings are displayed.
Advertenties
Inhoudsopgave
