Inhoudsopgave
Advertenties
ENGLISH
Receiving
On receipt, visually inspect the product for any
physical damage. If necessary, note any damage
on the delivery receipt and contact the transport
company immediately.
Check the delivered parts against the delivery
note. Contact your supplier if something is
missing, see Contact information.
Installation
NOTE
Installation may only be performed by a qualified
service partner.
Mechanical installation
The battery charger is designed only for
indoor use unless the charger is at least IPX4-
rated.
Comply with the dimensions specified for free
•
space around the battery charger. See Fig. 2
Installation.
The battery charger can be:
•
•
placed standing freely on a floor or the
ground or,
•
mounted on a shelf, wall, stand, or similar.
CAUTION
•
The battery charger is heavy, use lifting
equipment when lifting and moving.
•
The battery charger may become warm during
use. Ensure ventilation around the charger.
If the charger is mounted on a shelf, wall,
•
stand or similar, it must be securely fastened.
Use screws and lock washers when attaching
the charger.
Electrical installation
WARNING
RISK OF ELECTRIC SHOCK!
Incorrect connection of battery cables can cause
personal injuries and damage to the battery,
battery charger and cables.
Make sure the connections are correct.
6
WARNING
RISK OF ELECTRIC SHOCK!
Risk of live chassis.
Always connect the charger to a power outlet with
protective earth.
1. The battery charger is produced for different
mains voltages. Check that the power supply
at the site of the installation complies with the
rated voltage and current specified on the
battery charger's data label. The charger is
normally equipped with a fixed mains cable
with connector.
2. Check the polarity of the battery connector
and cable before connecting the battery. The
charger is normally delivered with a battery
cable with the following polarity:
•
Positive (+) = Red
•
Negative (−) = Blue or Black
3. Connect the battery cables to the battery.
4. Connect the charger to the BMS.
5. Check adjustments for BMS and charging
process, refer to Safety precautions, Before
start charging.
Operation
User interface - Control panel
See Fig. 1 Control panel
1. NFC symbol ( GET Ready)
2. Alarm indicator (Red)
3. Charging indicators (Green and yellow)
4. Pause
5. F1 / F2 (Shortcuts)
6. Keyboard for navigation in display menus
7. Mains indicator (Blue)
8. Display
Advertenties
Inhoudsopgave
