Advertenties
DELTAone
Instrument
Charger
switched off
connected
switched on
not connected
DELTA 30 and DELTA 30 PRO
Instrument
Charger
switched off
connected
not
switched on
connected
If the device is switched off, the charge indicator remains on for a further 3 seconds and then goes off.
Do not look directly into the light source when checking the charge level.
Operation
To switch on the illumination, press the button (1,9) on the instrument. The device starts with the last
selected brightness level and in polarisation mode.
For DELTA 30 PRO: The device starts with the last selected colour temperature, last selected brightness
level and in polarisation mode.
Press the button (6, 11) to adjust the brightness in three steps.
The device switches off automatically after 10 minutes if the polarisation buttons, the colour temperature
buttons or the brightness control are not used.
DELTA 30 PRO colour temperature change
By pressing the button (19) labelled as "C" on the front of the DELTA 30 PRO, the colour temperature is
changed forward to a more bluish colour with a high CCT value. There are 4 colour temperatures to cycle
through. If the highest value is reached, the cycle starts again with neutral warm white.
HEINE DELTA 30 PRO is intended for a transient examination of less than 20 minutes with a 10 minutes
break until the next application.
10/68
med 236321 2023-09-07
Battery
charging
full
full (≥ 25 %)
empty (< 25 %)
residual capacity (< 10 %)
Battery
100 %
full (99 % – 66 %)
sufficiently charged
(66 % – 33 %)
empty (≤ 33 %)
full (≥ 66 %)
sufficiently charged
(66 % – 33 %)
empty (33 % – 10 %)
residual capacity (< 10 %)
blue
cold
white
cold
white
Charge indicator
green, flashing
green
green
orange
orange, flashing
Charge indicator segments
Green - 1
Green - 2
on
on
flashing
on
off
flashing
off
off
on
on
off
on
off
off
off
off
Neutral
warm
white
Neutral
cold
white
Orange - 3
on
on
on
flashing
on
on
on
flashing
Advertenties
