Inhoudsopgave
Advertenties
4
Operation
Figure 5
All manuals and user guides at all-guides.com
4.5 Changing appliance settings
You can change all the settings on the Visionair by turning and/or pressing the
control button h. You can see your settings on the control panel 9. Turning the
control button h changes the appliance setting values.
By pressing the control button h once at a time, the appliance settings for
temperature, airflow and drying time are selected in that order, starting with the
drying time setting (loop).
After 10 seconds in the appliance setting temperature and airflow, the display
automatically goes back to the drying time setting.
4.5.1 Setting the drying time
1. Turn control button h and set the desired drying time k.
➥ The appliance starts.
➥ The two pilot lamps j light up.
Extending the drying time
• You can change the drying time at any time during the treatment
by turning the control button h.
• The total treatment time is limited to 60 minutes for safety reasons.
If a drying time of more than 60 minutes is needed, the appliance
must be restarted with a time input by turning the control button
h.
• Then the drying time can be set to max. 60 minutes once again.
4.5.2 Setting the temperature
1. Press the control button h repeatedly until the appliance setting
temperature is selected.
➥ The temperature symbol i flashes.
➥ The default, recommended setting is temperature level 8.
2. Turn the control button h and set the desired temperature level m.
4.5.3 Setting the airflow
1. Press the control button h repeatedly until the appliance setting airflow is
selected.
➥ The airflow symbols l flash.
➥ The default, recommended setting is airflow level II.
2. Turn the control button h and set the airflow to level I or level II.
•
The appliance settings temperature and airflow can be reset at any time:
1. Press the control button h repeatedly until you reach the desired appliance
setting e.g. temperature.
2. Turn the control button h and set the desired temperature level m.
NOTE
41
Advertenties
Hoofdstukken
Inhoudsopgave
