Inhoudsopgave
Advertenties
4.
Put the cable between the inner cap and
the suspension system straps in a way
to avoid any pressure points on the
head.
4
Use
4.1
Connection to the Communication System
WARNING!
The headset should be connected to the communication system before switching on the terminal. Do not
disconnect the device while the radio is in use.
Failure to follow this warning can result in serious personal injury or death.
1.
Turn off the radio terminal.
2.
Connect the headset to the Communication system using the supplied quick release plug.
3.
Position the PTT/RSM/radio in the preferred position (belt, shoulder straps, etc.). Wearing equipment
under cloths will protect them from the environment.
Keep a distance of 20 to 30 cm between the PTT/RSM and the radio module to avoid any risk of
interference that may reduce communication quality.
4.
Turn on the radio terminal. Refer to Radio Terminal user's instructions if needed.
Incoming communications are now directed to the headset loudspeaker (1 or 2 speakers).
5.
Adjust the volume on the radio to an appropriate level (or on the headset if equipped).
The devices are designed for use with 2-way radios (simplex mode).
6.
To listen to incoming messages, release the PTT/RSM push button.
7.
To speak (provided that the line is open), push the PTT push button and speak loud and clear.
8.
Release the push button once transmission is over.
4.2
Flexible Microphone Adjustment
The position of the flexible microphone can be adjusted by approximately 80 mm to properly position the
microphone.
When using without a Breathing Apparatus (BA), the microphone should be positioned in front of the
mouth.
When using with a BA, the microphone should be positioned in front of the speech diaphragm of the
facepiece. Refer to the facepiece instructions manual to locate the speech diaphragm.
GB
1.
Change the microphone position by
sliding it gently along its mounting rail.
4 Use
7
Advertenties
Inhoudsopgave
