Inhoudsopgave
Advertenties
3.1
Flexible Microphone Headset
rear
1.
Insert the hook (A) into its designated slot.
2.
Push the clip (B) into its slot until it clicks.
3.2
Speaker Module (Bone Conductive or Second Speaker)
Check the indication on the back of the module to position it on the proper side of the helmet (L or R).
1.
Insert the hook (A) into its designated
slot.
2.
Push the clip (B) into its slot until it clicks.
WARNING!
Ensure that the front retention strap does not obscure field of vision
Failure to follow this warning can result in serious personal injury or death.
GB
The headset is installed on the right
front
side of the helmet.
3.
Push the retention clip (3)
behind the edge of the
locking clip as shown.
4.
Check the attachment by
gently pulling the module.
3.
For the second speaker (optional),
position the module so that the
connecting wire is located above the
suspension straps as shown.
3 Installation
5
Advertenties
Inhoudsopgave
