Inhoudsopgave
Advertenties
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address. When you have found your desired DMX address press ENTER then press and hold the MENU button for
at least 3 seconds to store your desired DMX address.
3. Connect your DMX Controller.
CHnd - This will let select your desired DMX channel mode.
1. Press the MENU button until "CHnd" is displayed, press ENTER. Either "16CH", "24CH", "48CH" will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and exit.
SLnd – Master-Slave configuration
1. Press the MENU button until "SLnd" is displayed, press ENTER. Either "MAST", "Soun", "SL 1", "SL 2" will be
displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, and press ENTER to confirm.
SHnd--This will let you to select your desired effect
1. Press the MENU button until "SHnd" is displayed, press ENTER.
2. "SH X" will now be displayed, Select 0-3 to choose your desert effect
Sens - Sound sensitivity
In this Mode a number between 0-99 will be displayed. Press the UP or DOWN buttons to adjust the sound sensitivity,
0 being the least sensitive and 99 being the most sensitive. Press ENTER to confirm.
BLnd - Operating mode of the unit if no DMX signal is present
1. Press the MENU button until "BLnd" is displayed, press ENTER.
2. The display will show either "bLAc" , "Auto", "Soun", "HoLd". To choose your desired mode.
3. Press ENTER.
Wile - In this mode you can adjust the white balance
1. Press the MENU button until "Wile" is displayed, press ENTER.
2. The display will show "RED", "Green", "Blue", and "White". Press the UP or DOWN buttons to select .
3. Press ENTER to confirm.
rPAN - Pan Inversion
1. Press the MENU button until "rPAN" is displayed, press ENTER. Either "YES" or "NO" will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Pan inversion, select NO and press Enter.
rTiL - 3Tilt Inversion
1. Press the MENU button until "rTiL" is displayed, press ENTER. Either "YES" or "NO" will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Tilt inversion, select NO and press Enter.
REST - System reset.
1. Press the MENU button until "REST" is displayed, press ENTER.
2. The fixture will now reset. Press MENU to exit.
DMX CHANNELS
16 channel definition table
Channel
DMX Value
Function
Page 5
Advertenties
Inhoudsopgave
