Inhoudsopgave
Advertenties
•
Extra long life CREE LEDs (>50,000 h)
•
3 x 3 zones
•
Narrow beams
•
DMX, stand-alone, master-slave and show modes
•
Built-in music controlled programs
•
Pulse & Strobe effects
•
Electronic dimmer 0-100%
•
Suitable for wall, truss or floor mounting
Specifications
Power supply
.................................................................................................. 100-240Vac
50/60Hz Consumption .................................................................................................................
140W
.............................................................................................................................................
Light source .............................................................................................. 9x 10W RGBW CREE LED
Tilt ......................................................................................................................................... 0-185°
Pan.......................................................................................................................... Infinite rotation
Beam angle ...................................................................................................................................
5° Dimensions ....................................................................................................... 298 x 278 x
185mm
..................................................................................................................................... 4.5kg
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
The LED moving head provides a unique mounting bracket
assembly that integrates the bottom of the base, the
included 'omega bracket' and the safety cable rigging
point in one unit (see the illustration on the right).When
mounting this fixture on a truss, be sure to use an
appropriate clamp with the included omega bracket using
a M10 screw fitted through the center hole of the 'omega
bracket'. As an added safety measure, be sure to attach at
least one properly rated safety cable to the fixture using
one of the safety cable rigging points integrated in the
base assembly.
CABLE CONNECTORS
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
max.
Fuse
3A
Weight
Page 3
Advertenties
Inhoudsopgave
