Advertenties
Cleaning work producing in oily waste water, e.g.
washing engines, washing undercarriages etc.,
may only be performed at washing stations with an oil
separator.
Working with detergents may only be performed on
watertight surfaces with connection to the waste
water sewage system. Do not allow detergent to enter
waterways or the soil.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.de/REACH
Intended use
Use the high-pressure cleaner in private households
only.
The high-pressure cleaner is intended for cleaning ma-
chines, vehicles, buildings, tools, façades, terraces,
garden machines etc. using a high-pressure water jet.
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the event
of any shipping damage, please notify your dealer.
Device description
For the figures, please refer to the graphics page
Illustration A
Water connection coupling
1
Water connection with integrated sieve
2
Mains connection cable with mains plug
3
Storage for spray lances
4
Storage for high-pressure hose / mains connection
5
cable
High-pressure hose
6
Spray lance with dirt grinder for stubborn soiling
7
Spray lance with high-pressure nozzle for normal
8
cleaning tasks
High-pressure gun
9
Clamp for connecting / disconnecting the high-
10
pressure hose
High-pressure gun lever
11
High-pressure gun lock
12
Carrying handle
13
Trigger "0/OFF" / "I/ON"
14
High-pressure connection
15
Type plate
16
*Garden hose (fabric reinforced, diameter at least
17
1/2 inch (13 mm), length at least 7.5 m, with com-
mercially available quick coupling)
* additionally required
8
Safety devices
CAUTION
Missing or modified safety devices!
Safety devices are provided for your own protection.
Do not bypass, remove or render ineffective any safety
devices.
The power switch prevents unintentional operation of
the device.
High-pressure gun lock
The lock locks the lever of the high-pressure gun and
prevents the device from starting unintentionally.
Auto-stop function
If the lever of the high-pressure gun is released, the
pressure switch turns off the pump and the high-pres-
sure jet stops. The pump switches on again when the le-
ver is pressed.
Symbols on the device
Do not aim the high-pressure jet may at per-
sons, animals, live electrical equipment or
the device itself.
Protect the device against frost.
The device may not be connected to the
public drinking water network.
For the figures, please refer to the graphics page.
Fit the supplied loose parts onto the device before start-
ing up the device.
Installing the water connection coupling
1. Screw the water connection coupling onto the water
connection on the device.
Illustration B
1. Place the device on a flat and level surface.
2. Unwind the high-pressure hose and eliminate any
loops and twists.
3. Connect the high-pressure hose to the device.
a Pull up the clamp on the coupling.
b Insert the high-pressure hose into the coupling.
c Press down the clamp on the coupling.
Illustration C
4. Connect the high-pressure hose to the high-pres-
sure gun.
a Squeeze the clamp.
b Pull out the clamp.
c Insert the high-pressure hose.
d Press the clamp in until it latches into place.
Illustration D
5. Check for a secure connection by pulling on the
high-pressure hose.
6. Plug the mains plug into a mains socket.
For the connection values, see the type plate or chapter
Technical data.
Observe the water distribution company regulations.
English
Power switch
Mounting
Initial startup
Water supply
Advertenties
Hoofdstukken
