Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
C C
Useful information
Useful information
Problem
Knocking noise in the water
pipes
The dishes are not clean
Cloudiness on glassware.
White spots appear on dishes
and glasses.
Black or grey marks on dishes
Detergent left in dispenser
Possible causes
This may be caused by on-site
installation or the cross-section
of the piping.
The dishes were not loaded
correctly.
The program was not powerful
enough.
Not enough detergent was
dispensed.
Items are blocking the
movement of the spray arms.
The filter combination is not
clean or is not correctly fitted in
the base of wash cabinet. This
may cause the spray arm jets
to get blocked.
Combination of soft water and
too much detergent.
Hard water area can cause
limescale deposits.
Aluminium utensils have
rubbed against dishes
Dishes block detergent
dispenser
51
EN
What to do
• This has no influence on
the dishwasher function. If
in doubt, contact a qualified
plumber.
• See "Preparing And Loading
Dishes".
• Select a more intensive
program.
• Use more detergent, or
change your detergent.
• Rearrange the items so that
the spray can rotate freely.
• Clean and/or fit the filter
correctly. Clean the spray arm
jets.
• Use less detergent if you have
soft water and select a shorter
cycle to wash the glassware
and to get them clean.
• Check water softener settings
or fill status of salt container.
• Use a mild abrasive cleaner
to eliminate those marks.
• Re-loading the dishes
properly.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
