Advertenties
Chip ejector / hose connector
:
Installation flap for changing saw blade
∙
Mounting flange
$
Clamping flange
£
Clamping screw
|
Parallel guide
¡
Movable dust shield window
Q
Base plate
W
Intended use
The product described is a cordless plunge-cut circular saw. It is designed for cutting and for making
plunge-cuts exclusively in the following materials:
• Wood and wood-like materials
• Plastics
• Gypsum board
• Fiber-cement boards
• Non-ferrous metals
The product is intended for carpentry work and for work in interior finishing.
The circular saw is equipped with a hose connector for an optional dust extractor; this connector fits
standard-diameter vacuum cleaner hoses. A suitable adapter might be required for connecting the
dust-extractor hose to the saw.
Use only saw blades approved for the product that comply with the specifications set out in the
technical data (e.g. diameter, speed of rotation, thickness, material, etc...). Grinding and cut-off
wheels and saw blades made of highly alloyed high speed steel (HSS) are not permissible.
Saw only flat workpieces that offer a big enough contact surface to accommodate the whole of the
base plate.
• For this product, use only Hilti lithiumion batteries of the B 22 series. For this product, Hilti
recommends the use of the batteries stated in the table at the end of these operating instructions.
• For these batteries, use only Hilti chargers of the type series listed at the end of these operating
instructions.
Items supplied
Cordless circular saw, saw blade, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store
or at: www.hilti.group
Status indicators of the Liion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of
health.
Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶
If the release button is pressed with a battery inserted in the product, subsequently check that
the battery is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following status indications is
applicable at the time.
State of charge and, if applicable, faults are indicated constantly as long as the connected product
is switched on.
*2373402*
2373402
Cutting depth adjustment
E
Clamping screw for parallel guide
R
Clamping screw for cutting angle adjust-
T
ment
Adaptive cutting line indicator
Z
Battery
U
Battery status indicator
I
Release button, battery
O
28
Advertenties
