Inhoudsopgave
Advertenties
The light does not work.
Vibrations.
The wine refrigerator seems
to make to much noise
The
door
will
properly.
LED could not display.
LED display error - Lo
Buttons are not functional.
Compressor will not start
Compressor re-start
Dew
on
the
surface
cabinet：
Liquid sound
Condensation formed inside
the cabinet
Error code E2
Attention
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
Contact the service center.
Check to assure that the wine refrigerator is level.
The wine refrigerator is not level. Check the fan.
not
close
The wine refrigerator is not level.
The door is reversed and not properly installed.
The seal is weak. The shelves are out of position.
Main control board does not work.
PCB Problem. There is some problem with the plug.
Problem with display.
PCB problem. Check the service center.
Temperature controller panel is damaged.
Room temperature is lower than desired temperature.
Compressor will stop working when cooling system in the
cabinet reaches
working until the desired temperature is achieved. Allow a
minimum 5 minute interval before re-starting.
of
The surface of wine cabinet especially the glass door
appear some frost if item in a damp room. This is due to the
moisture in the air coming into contact with the cabinet.
Please wipe it away with dry cloth.
1. The sound of compressor when starts or stops working
2. The flowing sound of refrigerant in the refrigeration
system
3. The evaporating sound of refrigerant in the evaporator
Under the environment with high level of humidity or the
door of wine cabinet has been left open for a long period or
opened frequently, wipe off the door and walls and leave the
door closed as long as possible.
Desired temperature is not reached.
If necessary defrost the device (Please follow the hints for
manual defrosting in chapter cleaning).
presetting temperature, and re-start
39
Advertenties
Inhoudsopgave
