Inhoudsopgave
Advertenties
B
WARNING
ASSEMBLY
Once the components have been cleaned and dried, assemble in the following
Make sure that the spout is inserted correctly in the hole
order: screw in the spout, lid and stopper.
provided (1) when assembling the tank. Installing the
tank in the door (2).
Check the vertical and horizontal alignment of the tank
in the door (3) and (4).
FILLING
Before filling the tank, make sure that it is correctly positioned and stable. Do not exceed the 3
litre limit when filling the tank.
The tank can be filled by taking out the stopper and removing the lid.
WARNING
Take care not to touch any other parts when filling the
tank as this could damage the water dispensing system
and cause leaks.
Using the appliance
14
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
