Advertenties
Ejecting the saw blade
WARNING
Risk of injury. Uncontrolled ejection of the saw blade can lead to injury.
▶
When ejecting the saw blade, hold the product in such a way that it presents no risk of injury to
persons or animals.
1.Disconnect the supply cord plug from the power outlet.
2.Push the saw blade ejection lever to the side as far as it will go.
▶
The saw blade will be released and ejected.
Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a
power outlet can lead to severe injury and burns.
▶
Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove stubborn dirt from the tool.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone
as they can attack the plastic parts.
Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries
including burns.
▶
Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that
they all function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function
correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
Spare parts, consumables and accessories approved by Hilti for use with the product can be
found at your local Hilti Store or online at: www.hilti.group.
Cleaning the dust removal adapter
1.Disconnect the supply cord plug from the power outlet.
2.Disconnect the vacuum cleaner hose from the dust removal adapter.
3.Remove the dust removal adapter.
4.Clean the dust removal adapter.
5.Check that the catches are undamaged.
6.Fit the dust removal adapter.
Cleaning the saw blade
1.Clean resin deposits from used saw blades at regular intervals.
2.Place the saw blades in a bath of kerosene (paraffin oil) or commercially-available resin remover for
24 hours.
*2150159*
12
19
18
2150159
20
Advertenties
