Advertenties
Dust blower
The dust blower directs a jet of air toward the saw blade in order to keep the cutting line free of dust.
Stroke rate
The stroke rate can be adjusted by turning the thumbwheel. Position 1 corresponds to 800 strokes
per minute and position 6 corresponds to 3000 strokes per minute.
4 orbital-action settings
The 4 orbital-action settings allow cutting performance and quality of cut to be adjusted to suit the
material to be cut. The orbital-action adjustment lever is used to set the power tool to one of the 4
settings.
The lower the orbital-action setting, the finer and cleaner the cut edges will be. The optimum setting
can be determined by carrying out practical tests.
Status
Position 0
Position 1
Position 2
Position 3
Anti-splinter insert
The product can be equipped with an anti-splinter insert.
The anti-splinter insert helps prevent splintering on the surface of wood materials when cutting.
Items supplied
Orbital-action jig saw with saw blade, guard, dust removal adapter, anti-splinter insert, operating
instructions, hex key.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
Technical data
Orbital-action jig saw
When powered by a generator or transformer, the generator or transformer's power output
must be at least twice the rated input power shown on the rating plate of the power tool. The
operating voltage of the transformer or generator must always be within +5% and -15% of the
rated voltage of the power tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of
deviations from the rated voltage and for country-specific versions. Please refer to the power
tool's type identification plate for details of its voltage, frequency, current and input power
ratings.
Product generation
Rated power input
Weight in accordance with EPTA procedure 01
Stroke rate under no load
Stroke length
Maximum cutting performance in wood
Maximum cutting performance in aluminum
Maximum cutting performance in unalloyed steel
*2150159*
2150159
Meaning
No orbital action
Low orbital action
Medium orbital action
High orbital action
SJT 6
01
850 W
2.4 kg
800 /min ... 3,000 /min
28 mm
150 mm
25 mm
10 mm
16
Advertenties
