Inhoudsopgave
Advertenties
8. Maintenance/cleaning
Maintenance
The LED emitter (1) does not contain any parts that require maintenance. The LED lamp cannot be
replaced.
Cleaning
DANGER! The mains power must be switched off for all work on the LED emitter (1), even
cleaning! Otherwise there is a risk of electric shock!
DANGER! Make sure that no liquid can penetrate the housing of the LED emitter (1).
Otherwise there is a risk of electric shock.
To clean the LED emitter (1), use a dry cloth. Never use any solvents or cleaners that could damage the
plastic housing. For more stubborn dirt, use a slightly damp cloth.
9. Troubleshooting
The light does not come on
The movement sensor (2) is not aimed correctly. Correct the positioning.
The electrical connection is faulty. Get the electrical connection checked by an electrician.
The light switches on and off quickly
There is interference to the sensor from other light sources or bright reflective surfaces. Remove the
external light source or reflective surface.
The light does not switch off
There are people or moving objects in the detection range of the movement sensor (2). Remove them.
The LED emitter (1) is moving in the wind, which is constantly triggering the movement sensor (2).
Always secure the LED emitter (1) to a stable mounting point.
You can download this and many other manuals, product videos and
setup software from www.lidl-service.com.
This QR code takes you to the LIDL Service portal (www.lidl-
service.com) where you can use your item number (IAN)
383536_2107 to open your User Manual.
LIVARNO HOME LSLB 100 A2
English - 15
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
