Inhoudsopgave
Advertenties
LIVARNO HOME LSLB 100 A2
6. Before you start
Remove the LED emitter (1) and fitting materials from the packaging.
Check the LED emitter (1) for damage. If the LED emitter (1) is damaged, do not use it.
If the delivery is damaged or incomplete, please contact the manufacturer's customer services.
6.1 Energy-efficient use
The LED emitter (1) offers various energy-efficient, power-saving options:
Align the movement sensor (2) so that it only reacts within the required area. This reduces the number
of times the LED emitter (1) switches on.
Use the SENS controller (5) to adjust the sensitivity of the movement sensor (2) so it is only just as
sensitive as you require. This reduces the number of times the LED emitter (1) switches on.
Use the LUX controller (4) to adjust the lighting sensor so it only reacts at the level of darkness you
want. This prevents the LED emitter (1) switching on in brighter conditions and reduces the number it
times it switches on.
Use the TIME controller (3) to adjust the light duration to no longer than required.
Also make sure that there is nothing in the range of the movement sensor (2) which could trigger it
accidentally, e.g. tree branches or shrubs, traffic, pedestrians, etc. This reduces the number of times
the LED emitter (1) switches on.
The reference settings, such as light colour, colour temperature, brightness, beam angle and light spectrum
are hard-coded depending on the model and cannot be modified by the user.
6.2 The right place for mounting
Select a location carefully and prepare well before mounting.
Arrange all the individual parts, tools required and fittings tidily so everything is ready to hand.
The LED emitter (1) must only be mounted on stable surfaces such as walls.
The power supply must be via the building's electrical circuit.
Do not mount the LED emitter (1) above a heat source or in the immediate vicinity of other light
sources. When choosing the right place for mounting, please also note the illustrations [D and E] on
the cover page.
Select the location so that the LED emitter (1) is protected from wind, rain and dirt.
Find out in advance what fittings are suitable for the location you have chosen. Suitable fittings for
mounting the LED emitter (1) on concrete are provided.
8 - English
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
