Inhoudsopgave
Advertenties
MAINTENANCE
All maintenance operations are carried out with
the tool disconnected from the compressed air
supply.
Maintenance and repair operations must be carried out
by qualified personnel.
At the end of each work session, or when required, re-
move any dust from the body of the tool using a jet of
compressed air.
ORDINARY MAINTENANCE
Lubricate the machine regularly (every 50 hours of
operation) by inserting 2/3 drops of specific oil (10)
into the compressed air connection, keeping the de-
vice in a vertical position, with the connection facing
upwards. After this operation, connect the machine to
air compressor and set it in motion for a few seconds.
Lubricate the machine as described above before sto-
ring it for long periods of inactivity.
All damages deriving from incorrect or inadequate lu-
brication are excluded from the warranty.
No other maintenance operations must be under-
taken by the user.
Maintenance and cleaning of the inner parts, must be
carried out only by an authorized customer-service
workshop.
Use only RUPES original spare parts.
DISPOSAL
The product, when it reaches the end of its life, must
not be di-spersed in theenvironment or thrown away
as household waste. It must be disposed atauthorized
recycling centres (contact your lo-cal authorities to
know where todispose of the product according to the
law). The correct disposal of the productcontributes
to the health and preservation of the environment.Ille-
gal disposal of the product will entail penalties against
the offenders.Disposing of the product correctly con-
tributes to protecting human health and-safeguarding
the environment. Any illegitimate disposal of the pro-
duct will bepunishable by law.
CONFORMITY DECLARATION
We declare on our responsibility that the hand-held
power tool, which is mentioned in the present opera-
ting manual, is in conformity with the Essential Requi-
rements of Safety of the following Directive:
2006/42/CE Macchine
he tests have been carried out in accordance with fol-
lowing Standards:
UNI EN ISO 11148-8 - UNI EN ISO 15744 - UNI EN
ISO 28927
Technical file at:
RUPES S.p.A.
Via Marconi, 3A
20080 VERMEZZO (Mi) - Italy
Vermezzo (MI), 2018/10/03
RUPES S.p.A.
IL PRESIDENTE
G. Valentini
9 9
Advertenties
Inhoudsopgave
