Inhoudsopgave
Advertenties
TECHNICAL DATA
The tool must be connected to a suitable dust extraction system (not supplied)
RANDOM-ORBITAL PNEUMATIC SANDERS
Max. working pressure [bar/PSI]
Air consumption [l/min]
Rpm n° [/min]
Ø orbit [mm]
Ø pad [mm]
Extraction system
Weight [Kg]
GENERAL WARNINGS
The safety and accident prevention instructions
are reported in the "SAFETY INSTRUCTION"
booklet which forms an integral part of these
documents. This OPERATING INSTRUCTION
MANUAL indicates the additional information
required specifically for use of the tool.
CORRECT USAGE
This tool is designed to be used as a sander.
Read all the warnings, instructions, indications
provided on drawings and specifications supplied
with this tool.
Failure to comply with all the instructions provided
below may cause serious injuries.
This tool is not intended to be used for metal
brushing, polishing and cutting operations.
The use of this tool for unintended applications may
cause hazards and injuries to people.
NOISE / MEAN ACCELERATION VALUE
The noise level produced and the mean quadratic
acceleration value are measured according to
regulation UNI EN ISO 15744 -EN ISO 28927.
Sound pressure
level [dB(A)]
TA6A
75
Vibration level
3 axis
2
[m/s
]
TA6A
3,00
Uncertainty
Sound power
[dB(A)]
level [dB(A)]
3
86
Uncertainty
1 axis (*)
2
2
[m/s
]
[m/s
]
0,30
2,60
(*) Vibration level defined by previous regulation EN
ISO 8662.
Displayed emission values are comparative and are
to be employed for a provisional assessment of the
operator's risk exposure during the work period.
Appropriate evaluation of work period must also
include tool's idle and stop periods. These emission
values represent the tool's main applications. If the
tool is used for other applications, with other
accessories, or if it does not undergo regular
maintenance, emission values can significantly
increase during operations.
PARTS OF THE TOOL
1. Identification plate
2. Compressed air on/off lever
3. Speed control
4. Tool body
5. Compressed air connection with 1/4" thread
6. 25 / 29 mm. int. Ø suction pipe connection
7. Suction shroud
8. Backing pad
9. Back-up pad screw
10. Lubricating oil
11. Back- up pad spanner
STARTING UP
Before starting-up the tool, ensure that:
- the packaging is complete and does not show signs
of having been damaged during storage or tran-
sport;
- the available compressed air production and distri-
bution plant is capable of satisfying the require-
ments reported on the tool's identification plate.
TA6A
6.2 / 90
500
0 ÷ 8500
6
150
CENTRALIZED
1,2
7 7
Advertenties
Inhoudsopgave
