Inhoudsopgave
Advertenties
R-S
B
IGNAL
UTTON
5.3 Dialling and storing telephone numbers when using on
private exchanges
Note! The pause function after an outside line code (usually 0 or 9) descri-
bed in this chapter is only required on older private exchanges.
With some private exchanges, there is a short pause between the code for
the outside line (usually 0 or 9) and the dialling tone. When dialling manual-
ly and when dialling using the direct dial and speed dial buttons, this pause
can be entered along with the number so that the following digits are not
dialled too quickly.
5.3.1 Entering the pause when dialling manually
Press the
button once between the number for the outside line and the
actual telephone number. The pause will be shown by a "P" in the display.
After connecting to an outside line your telephone will wait for three
seconds before dialling the actual telephone number
5.3.2 Storing the pause
When storing a number, simply press the
button after the number for
the outside line and before the actual telephone number. The pause will be
shown by a "P" in the display. When dialling using the direct dial or speed
dial buttons a pause of three seconds will automatically be inserted after
the number for the outside line.
23
Advertenties
Inhoudsopgave
