Inhoudsopgave
Advertenties
The menu is changed using
Menu movement key
INTRO
Menu entry or option validation key
ESC
Menu exit or cancellation Key
4. OPERATING
4.1 TRANSMITTER / TRANSMITTER+PROX / PROXIMITY
4.1.1 Add instal code
This allows for the installer code to be installed on transmitters and proximity elements)
Place the device in the programming area and follow the on-screen instructions. Press Esc. to exit the menu.
4.1.2 Substitution
This allows for transmitters and proximity elements to be replaced.
Enter the code of the device to be replaced and follow the on-screen instructions.
4.1.3 Remove instal c.
This allows for the installer code to be removed from transmitters and proximity elements.
Place the device in the programming area and follow the on-screen instructions.
4.1.4 Add PIN1 code
This allows for a PIN code to be added to the devices.
Enter the PIN code of the receiver to which the device is to be programmed and follow the on-screen instructions.
4.1.5 Add PIN2 code
This allows for a PIN code to be added to the devices.
Enter the PIN code of the receiver to which the device is to be programmed and follow the on-screen instructions.
4.2 MEMORIES
This allows for work with receiver and access control station memories In the event of working with station memories, the
programmer will request the access password.
4.2.1 Add new code
This allows for transmitters and proximity element codes to be registered on the memory card.
Insert the memory card in the corresponding slot and enter the code of the device to be registered or place the device in
the programming area (in the case of a transmitter, press transmitter). Press Intro.
4.2.2 Del code
This allows for transmitters and proximity element codes to be cancelled from the memory card.
Insert the memory card in the corresponding slot and enter the code of the device to be cancelled or place the device in the
programming area (in the case of a transmitter, press transmitter). Press Intro.
4.2.3 Assign reserve
This allows for the reserve code previous programmed onto the memory card using the ASSISTANT to be transferred to the
device.
Place the device in the programming area and follow the on-screen instructions.
4.2.4 Substitution
This allows for transmitters and proximity elements to be replaced.
Enter the code of the device to be replaced and enter the new code or place the device in the new programming area (in
the case of a transmitter, press transmitter) and follow the on-screen instructions.
4.2.5 Show contents
This allows for the contents of the memory card or the events card to be displayed.
Insert the memory card in the corresponding slot and press Intro.
Memory card
P:1
Indicates the memory position
C1:
Indicates the relay or relays active for channel 1
C3:
Indicates the relay or relays active for channel 3
Observ.
Indicates whether the code is in reserve or has the killpass function enabled
COD.1247021_PROGMAN_v1.2
. To validate each option, press INTRO.
Code:
Indicates the device code
C2:
Indicates the relay or relays active for channel 2
C4:
Indicates the relay or relays active for channel 4
11
Advertenties
Inhoudsopgave
