Advertenties
GB
3. Inspect the power cord to ensure that it is
not damaged.
4. Rotate and open the bottom of the device as
described in Chapter 9. Remove and unpack
the combi filter. Then reseat the unpacked
filter, close the device and turn it over again.
5. Wait until the device reaches room tempera-
ture.
6. Connect the power cord to a mains socket.
7. Soehnle Connect app
In order to use functions such as remote control
or data recording of your Soehnle Clean Con-
nect 500, it is recommended to connect the de-
vice to the Soehnle Connect app.
1. Download and install the free Soehnle Con-
nect app on your smartphone or tablet. Scan
the QR code to go directly to the app. Alter-
natively, you can find it on Google Play or the
App Store.
Android
: ≥ 6.0 / iOS
™
2. Activate Bluetooth® on your smartphone or
tablet and start the Soehnle Connect app.
When you start the app for the first time, you
will be automatically guided through the
process for connecting a Soehnle appliance.
Please ensure that Bluetooth® is activated on
your Clean Connect 500 when connecting.
Please note the "Bluetooth® connection"
If you have already used the Soehnle Connect app, to con-
nect go to the "Main menu" in the Soehnle Connect app
and press "My devices" and then "Add device".
12
: ≥ 10 / Bluetooth
: ≥ 4.0
®
®
8. Daily use and operation
PM 2.5 sensor
The current air quality is determined continu-
ously and displayed numerically on the display.
The displayed PM 2.5 value is the fine dust load
(50% of particles < 2.5μm) in μg/m³. The lumi-
nous LED ring on the top shows the current de-
gree by means of different colours:
RED = high load (>150 µg/m³)
PINK = medium load (101 - 150 µg/m³)
PURPLE = low load (51 - 100 µg/m³)
BLUE = no load (0 - 50 µg/m³)
Switching on and off
Press the ON/OFF button (M) to turn the
Airfresh Clean Connect 500 on or off.
Setting the operating time
Press the (L) button to set the desired op-
erating time. Choose between 2, 4 and 8
hours. The device switches off automatical-
ly after the time has elapsed. The selected
operating time is displayed on the control
console. If no operating time is selected
(no indicator light is on) the Airfresh Clean
Connect 500 is in continuous operation.
Changing the fan speed
Press the button (J) to select the fan
speed and thus the desired intensity of
the air ejection:
Low (I) – Medium (II) –
High (III) – Turbo (IV)
Automatic mode
Pressing the (K) button puts the Clean
Connect 500 into automatic mode. In
this mode, the unit automatically adjusts
the fan speed in relation to the air quality
in the room. Thus, you always achieve the
best possible air quality.
Advertenties
