Advertenties
water or another liquid, even if the device is
no longer connected to the power outlet at
that time. Risk of electric shock in case of
moisture when the device is reconnected to
the power outlet. Use a dry cloth to wipe
moisture off. Do not touch the power plug or
device with wet hands.
• The filter has to be changed, do not unscrew
the device beyond that. In particular, replace-
ment of the UV-C lamp by the user is not
permitted.
Attention!
• If the power outlet used to operate the Airfresh
Clean Connect 500 is not properly connected,
the power plug of the device will get hot. En-
sure that you are using a properly connected
power outlet for the device.
• Do not place any objects on top of the Air-
fresh Clean Connect 500 and do not sit on it.
• Use only the original filter by Soehnle, which
is specifically suited for this Airfresh Clean
Connect 500.
• Do not use the Airfresh Clean Connect 500
after using incense for insect protection or in
places with oil residue or chemical vapours or
where incense sticks are burnt.
• Do not use the Airfresh Clean Connect 500 near
heaters, fireplaces, or gas-powered devices.
• Do not stand on the device.
2. Scope of delivery
1 Soehnle Airfresh Clean Connect 500
1 Soehnle combination filter for Airfresh Clean
Connect 500
1 Operating manual
3. Device description
A : Control console
B : Cover and air outlet
C : Housing and air inlet
D : UV-C lamp
E : Combination filter (68107)
F : Removable housing base
G : Screw cap
4. Intended use
The Airfresh Clean Connect 500 is intended ex-
clusively for cleaning room air.
5. Air cleaning
With the Soehnle EPA 12 combi filter you can
remove a large number of unwanted particles
and odours from the room air. Microorganisms
and viruses are destroyed by switching on the
UV-C light.
Pre-filter:
Captures coarse dust.
Soehnle EPA 12 combination filter:
A EPA 12 filter detects dust, smoke, pollen and
other allergens. An activated carbon filter filters
odours from the air.
UV-C light:
Destroys microorganisms such as germs, viruses,
bacteria, fungal spores and mould toxins
(mycotoxins).
6. Prior to first use
1. Place the device upright on a solid and level
surface. Keep a minimum distance of half a
metre from the device to each wall.
2. To ensure optimum performance of the
device, please ensure that the air inlets and
air outlets are not covered.
GB
11
Advertenties
