Download Inhoudsopgave Inhoud Print deze pagina

General Cleaning; Clean Thetransfer Ribbon Drawing Roller - Carl Valentin VARIO V Korte Handleiding

Verberg thumbnails Zie ook voor VARIO V:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 118
Vario V
Cleaning
DANGER!
Risk of death by electric shock!
Before opening the housing cover, disconnect the label printer from the mains supply and wait for a moment
until the power supply unit has discharged.
NOTICE!
When cleaning the label printer, personal protective equipment such as safety goggles and gloves are
recommended.
Cleaning task

General cleaning.

Clean the transfer ribbon drawing roller.
Clean the pressure roller.
Clean the printhead.
Clean the label photocell.
NOTICE!
The handling instructions for the use of Isopropanol (IPA) must be observed. In the case of skin or eye contact,
immediately wash off the fluid thoroughly with running water. If the irritation persists, consult a doctor. Ensure
good ventilation.
WARNING!
Risk of fire by easily inflammable label soluble!
When using label soluble, dust must be completely removed from the label printer and cleaned.
General Cleaning
CAUTION!
Abrasive cleaning agents can damage the label printer!
Do not use abrasives or solvents to clean the outer surface of the label printer.
Remove dust and paper fuzz in the printing area with a soft brush or vacuum cleaner.
Clean the outer surfaces with an all-purpose cleaner.

Clean theTransfer Ribbon Drawing Roller

A soiled drawing roller can lead to a reduced print quality and can affect the transport of material.
Remove the printer cover.
Remove the labels and transfer ribbon from the label printer.
Remove deposits with the roller cleaner and a soft cloth.
If the roller appears damaged, replace it.
Reload labels and transfer ribbon.
Close the printer cover.
114
Frequency
As necessary.
Each time the transfer ribbon is changed or when the printout
is adversely affected.
Each time the label roll is changed or when the printout and
label transport are adversely affected.
Direct thermal printing:
Each time the label roll is changed.
Thermal transfer printing:
Each time the transfer ribbon is changed or when the printout
is adversely affected.
When the label roll is changed.
English

Advertenties

Inhoudsopgave
loading

Inhoudsopgave