Download Print deze pagina

Preparing Charger For Use; Charging The Battery, Leds; Mounting The Charger On A Wall; Charging The Battery - Stihl AL 101 Handleiding

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 99

5 Preparing Charger for Use

4.9
Storage
WARNING
■ Children are not aware of and cannot assess
the dangers of a charger. Children can be seri‐
ously injured or killed.
► Disconnect the plug from the wall outlet.
► Store the charger out of reach of children.
■ The charger is not protected against all ambi‐
ent conditions. If the charger is exposed to
certain ambient conditions, the charger may
be damaged.
► Disconnect the plug from the wall outlet.
► If the charger is hot: Allow the charger to
cool down.
► Store the charger in a clean, dry place.
► Store the charger in an enclosed room.
► Do not store the charger outside of the
specified temperature limits,
■ The connecting cable should not be used for
carrying the charger or hanging up the
charger. The connecting cable and the
charger may be damaged.
► Hold the charger by the housing in a secure
grip. The charger is provided with a handle
recess to make it easy to pick up the
charger.
► Hang the charger on the wall mounting.
4.10
Cleaning, Maintenance and
Repair
WARNING
■ Harsh detergents, cleaning with a water jet or
sharp objects can damage the charger. If the
charger is not cleaned correctly, components
may no longer function properly or safety devi‐
ces may be rendered inoperative. They may
cause serious injury to persons.
► Clean the charger as described in this User
Manual.
■ If the charger is not serviced or repaired cor‐
rectly, components may no longer function
properly or safety devices may be rendered
inoperative. This may result in serous or fatal
injury to people.
► Do not attempt to service or repair the
charger.
■ If the connecting cable is faulty or damaged:
► Have the connecting cable replaced by a
STIHL dealer.
0458-013-9901-A
5
5.1
Perform the following steps before starting work:
► Make sure the charger is in a safe condition,
► Clean the charger,
► If you cannot carry out this work: Do not use
the charger and contact your STIHL servicing
dealer.
6
6.1
The charger can be mounted on a wall.
1
12.3.
a
► Check the following points when mounting the
charger on a wall:
– Suitable fixing materials.
– The charger is level.
6.2
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. For optimum performance, observe the
recommended temperature ranges,
actual charging time may vary from the charging
time indicated. The charging time is indicated at
www.stihl.com/charging-times.
The charging process starts automatically when
the mains plug is plugged into a socket and the
battery is inserted into the charger. The charger
switches off automatically when the battery is
fully charged.
The battery and the charger warm up during
charging.
Preparing Charger for Use
Preparing Charger for Use
4.5.
9.1.

Charging the Battery, LEDs

Mounting the Charger on a
Wall
2
a
b
The following dimensions are observed:
– a = at least 100 mm
– b = 75 mm
– c = 4.5 mm
– d = 9 mm
– e = 2.5 mm

Charging the Battery

English
3
d
e
e
12.4. The
13

Advertenties

loading