Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Testing the function via the Interlink module
A function test of the Interlink module can be made via the Interlink
module's test button. With this test, a signal is sent for 40 seconds to
the signolux receivers as well as to further Interlink smoke detectors.
These receiving Interlink detectors will react in the following way:
- With mounted in the base: By a double warning sound.
- With base removed: By the lighting up of the red transmission
indicator on the module. The test button on the top side of the
smoke detector is not active when the base is removed.
Functioning principle in case of an alarm
Upon detection CO or an unusually high room temperature, the Interlink
smoke detector will send a wireless signal (868.35 MHz) to any regis-
tered signolux receivers as well as further Interlink detectors within the
transmission range. The signolux receivers will react to the signal with
flashes of light and/or sound.
The triggered Interlink detectors give off an alarm sound.
71
Advertenties
Hoofdstukken
Inhoudsopgave
