recognised electrician to be checked and/or repaired. Always ask for original parts to
be used.
4.
The device may only be opened and/or repaired by a competent and qualified
person. Do not carry our your own repairs as this could be dangerous! Repairs carried
out by unauthorised persons or changes made to the device could damage the
dust/waterproof capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5.
If the electrical cable is damaged, it must be replaced by the manufacturer, their
service department or somebody with similar qualifications in order to prevent
creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They
will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be
liable for the consequences.
Description, Composition and Installation
1. air outlet grill heater
2. handle
3. thermostat dial
4. pilot light (2x)
5. mode selector dial (2x)
6. base
7. air intake grill (underside)
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
Select a suitable location for the device taking into account all the aforementioned
warnings in this manual.
Attach the feet supplied to the underside of the heater (see picture):
Turn the heater upside down. Place a blanket (or something
similar) under the heater to prevent damage!
Slide the feet into place on the sides, exactly along the gaps.
This will ensure that the threaded holes will align correctly.
Securely attach the feet to the heater using the self-tapping
screws.
Return the heater to the upright position.
27