Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. How to use
Main control
The e-paper display changes automatically to main screen approx . 15
seconds after activation or operation (fig . B1) .
Display informations (fig. B1)
Pos. Function
Status display, top (
1
perature above setpoint, unit does not heat)
2
Programme button 1
3
Menu button
4
Temperature display
5
Battery status
6
Status display, bottom (relevant information about the unit)
7
Programme button 2
8
Sensor keys
Temperature display
The scale ring fills up as the temperature setting is increased . When
water is flowing, the ring shows the power consumption . In addition, the
target temperature is displayed in °C in the middle of the display .
Operating lock active;
Inlet tem-
Temperature setting
The two middle sensor keys can be used to select the temperature in 1°
or, in the comfort range between 35 and 43°, in 0 . 5 ° increments from 20
to 60 °C . Below 20°C, the symbol
the heating function .
Programme buttons
The two programme buttons allow to quickly select the preset tem-
perature . When pressing a programme key, the preset temperature is
selected and displayed . The factory setting is 35 °C for programme 1
and 48 °C for programme 2 . You can assign your own settings for the
programme keys:
• Prolonged pressing of the programme key stores the previously
selected temperature . This newly set temperature is now available to
you each time you press the corresponding program key .
15
appears and the unit switches off
EN
Advertenties
Hoofdstukken
Inhoudsopgave
