Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• UK
6
1.4 Daily use
Start
The re place is made ready for lighting and the button on the EFC18 is activated by pressing once.
The re is lit and the chimney fan runs at full speed for 7 mins., and then slows down to the pre-
vious level. The speed of the chimney fan can be changed at any time from 1 – 9 by holding down
the button.
Refuelling
When the sensor is active (red dot in display), the refuelling option can be activated by pressing
the button brie y. The chimney fan increases speed to maximum for 3 mins.
Automatic stop
When the temperature falls below 20 °C, 40 °C or 80 °C depending on the setting, the 45 minutes
post purge period will start. The red dot in the display will start to ash.
Automatic operation
When the red dot in the display is illuminated, the temperature around the sensor is above the set
temperature, meaning that the chimney fan can only be stopped by switching o the electric sup-
ply.
Sensor error
If there is an error with the sensor, an "E" ashes on the display. Check the installation.
3001937-EFC18-DK-DE-NO-SE-UK-NL-FR
Advertenties
Inhoudsopgave
