Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3001937-EFC18-DK-DE-NO-SE-UK-NL-FR
1. GB - Product information
exodraft control EFC18 is, like the exodraft chimney fan, designed to be used with re places,
stoves and boilers for solid fuel.
Using the temperature sensor, the control unit can stop and start the chimney fan automatically.
Simple programming allows the EFC18 to be used with either an open re, a stove or boiler.
If more fuel needs to be added whilst the re is burning the fan speed can be increased to full for 3
minutes by a single press on the ON / OFF button.
The fan voltage and speed has an adjustment between 1 and 9.
1.1 Fitting the EFC18 and temperature sensor
Fitting the EFC18
• To separate the panel, rst remove the
frame.
• There are two screws at the back of the
frame which hold the panel in place on
the base. Loosen these and take o the
panel.
• Fit the base on a wall.
Fitting the temperature sensor
RSV
• Fit the sensor to the base plate of the
chimney fan.
• The sensor should be positioned.
See picture below
RS
UK •
3
Advertenties
Inhoudsopgave
