Franke FCMY 90 C WHG A FL Gebruiksaanwijzing pagina 12
Verberg thumbnails
Zie ook voor FCMY 90 C WHG A FL:
- Gebruiksaanwijzing (168 pagina's) ,
- Installatie-instructies (28 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Clean the hood using a damp cloth
and neutral liquid detergent.
4. CONTROLS
L
Key
Key press
L
Short
Long press with
light or motor on
Long press with
all loads off (mo-
tor and lights)
Short
T1
Long press with
light on
Long press with
all loads off (mo-
tor and lights)
12
T1
Function
The lights alternate between high intensity, medium intensity (if
present), off.
Delay Function
Activates/Deactivates the Delay function (automatic shutdown of the
Motor and of the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
Connected mode coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
The procedure for pairing of the hood with compatible devices (re-
mote control) starts. Only one remote control can be paired. See the
manual of the devices for details of the operations that need to be
performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be coupled. The maximum number of linkable
devices may have been reached.
Turns the motor on/off at the first speed.
Activates/Deactivates the Activated Carbon Filters alarm.
Connected mode decoupling
The procedure for deleting all compatible devices previously associ-
ated with the coupling function begins.
• For external and internal cleaning of
the hood avoid alcoholic or silicone
products.
If the product or one of its parts is made
of stainless steel, use specific non-ab-
rasive products for cleaning and follow
the lines of the satin finish during clean-
ing.
T2
T3
S1
T4
LED
-
Flashing
LEDs T1 and T2 flash-
ing:
coupling in progress.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 will
light up for 2 seconds.
Fixed
All LEDs flash twice:
alarm activated.
All LEDs lit for 1
second:
alarm deactivated.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 flash 5
times.
Advertenties
Inhoudsopgave
