Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
E N
From this moment on, the litre count starts based
on the set limit and if enabled, it will be displayed
the message "REPLACE SOFTENER".
A container can be used under the nozzle to collect
water during the filter activation process. When fin-
ished, in each case, it will be reported on the display
to verify that the drip tray is not too full of water.
Deactivate now
By pressing OK, the message "DEACTIVATED" is
shown and the counting functions of the processed
litres and of the messages shown on the display are
deactivated.
SETTINGS MENU
The settings menu is reserved to qualified and au-
thorised personnel.
1
Type in the correct password and then press
"Enter".
The default password is 333333. If an incorrect
password is entered, the display shows the fol-
lowing message for 3 seconds:
PW ERRATA
You can navigate between the following items in
the settings menu by using buttons 4 and 5.
Language choice
➤
Doses settings
➤
Descaling
➤
H
O Hardness
➤
2
Delta Temp
➤
Change password
➤
Energy saving
➤
Start pumps
➤
Card check
➤
Dispense counter
➤
Water softener counter
➤
LANGUAGE CHOICE
By confirming the "Language choice" item with
"Enter" you can change the menu and display lan-
guage.
In fact the lower level menu allows you to choose
the language you want by pressing buttons 4 and 5
and making a choice using the "Enter" button.
26
SETTINGS MENU
Italiano
➤
English
➤
Français
➤
Deutsch
➤
Espanõl
➤
Português
➤
Nederlands
➤
Press the "Esc" button one or more times to go back
to previous menu levels or to exit the menu.
DOSES SETTINGS
Confirming the "Doses settings" with "Enter" the pa-
rameters of the various selections can be changed,
within the predetermined limits. In fact the lower
level menu allows you to choose the selection you
want to change using buttons 4 and 5.
Product 1
➤
. .
➤
. .
➤
Product 6
➤
The selection of a product with the "Enter" key
shows the following parameters by pressing the
keys 4 and 5:
Offset pumps
➤
(allows you to change the pump activation time)
Offset TR1
➤
(allows you to change the hopper activation
time).
The item is displayed for all the products but is
active only for the products which require solu-
ble powder.
DESCALING
Remove the water softener filter, if installed, before
starting the descaling cycle.
The descaling cycle can be activated at any time,
including when the machine does not show it is
required. By confirming the "Descaling" item with
"Enter", the following message will run across the
display.
No more beverages can be dispensed until the cy-
cle has been completed.
DESCALING
INSERT DESCALING PRODUCT
INTO THE TANK AND PRESS OK
Advertenties
Hoofdstukken
Inhoudsopgave
