Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FAULTS
Fault table
Problems with the hob
There is a smell of gas in the
vicinity of the appliance.
A burner does not ignite.
EN 20
If you are uncertain about whether your appliance is functioning
properly, this does not automatically mean there is a defect. Make
sure to check the points mentioned below in the table first, or visit our
website 'www.pelgrim.nl' for more information.
Possible cause
The appliance connection
is leaking.
Plug not in socket.
Fuse defective/fuse in
meter cabinet switched off.
Spark plug dirty/damp.
Burner parts not correctly
installed.
Burner parts dirty/damp.
Main gas supply valve closed. Open the main gas valve.
Fault in gas mains.
Gas bottle or tank is empty.
Wrong type of gas used.
Control knob not pressed in
far enough.
Solution
Turn off the main gas tap.
Contact your installer.
Plug the plug into the wall
socket.
Replace the fuse or switch on
the fuse in the fuse box.
Clean/dry the spark plug.
Assemble the burner parts
using the centring ridges.
Clean/dry the burner
components. Make sure that
the outflow holes are open.
Consult your gas supplier.
Connect a new gas bottle or
have the tank refilled.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
Keep the control knob
pressed in far enough
between full and low. This
can take longer the first time
because of the gas supply.
Advertenties
Hoofdstukken
Inhoudsopgave
