Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
Cleaning the gas hob
EN 18
Special enamel coating
The oven, the inside of the door and the baking trays have been treated
with special enamel, which has a smooth and strong surface. This
special coating makes cleaning at room temperature easier.
Your gas hob has been manufactured from high-grade, easy-to-clean
materials.
• Regular cleaning immediately after use prevents food spills from
becoming ingrained and causing stubborn stains that are difficult to
remove. Use a mild cleaning detergent to remove stains. Do not use
too much moisture, as there is a risk that it will penetrate into the
burner or vent holes.
• Clean the control knobs, burners and pan supports first and then
the drip tray. This avoids the drip tray becoming dirty again
during cleaning.
• The ignition plugs should preferably be cleaned with a cloth. Do
this carefully. Otherwise the spark plug can become defective. The
spark plug will only operate correctly in a dry environment. If the
plug is very dirty, you can clean it with a tiny brush.
• Set the pan supports down vertically, without sliding them over the
drip tray.
• Assemble the burner parts using the guide notches. Pay attention
to the notches for the ignition plug and thermocouple. Make sure
the burner parts are lying flat.
Cleaning the pan supports
Do not clean the pan supports in the dishwasher. The enamel on
the pan supports is suitable for cleaning in the dishwasher, but the
connection with the rubber feet is not. The pan supports might also
show some discolouration if washed in the dishwasher. If the rubber
feet are lost, the pan support is likely to damage the drip tray.
Advertenties
Hoofdstukken
Inhoudsopgave
