Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh
air. As mentioned above, this is generally caused by (partially) covering the heater,
obstructing the air intake and/or outlet grills or installing the heater too close to a wall or
something similar. In case of overheating, switch off the heater and unplug. Give the
heater time to cool down, remove the source of the overheating and use as normal. If the
problem persists or if you have not been able to trace the source of the overheating, turn
the heater off immediately and unplug. Contact a servicing point to have the heater
repaired.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of
overheating so these should be removed regularly. Switch off the heater, remove the plug
from the socket and allow the heater to cool down before cleaning or carrying out
maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage
any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if possible.
Store it upright in a cool, dry and dust-free place.
Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver
the device to your supplier.
28
Advertenties
Inhoudsopgave
