Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Return the heater to the upright position.
Set-up and operation
Make sure the heater is turned off, mode selector dial to OFF, fan switched to O and
that the thermostat dial is set to maximum (clockwise, as far as it will go).
Now plug into an earthed, correctly functioning 220-240V / 50Hz socket. The pilot light
will switch on.
Turn the mode selector dial to the desired position:
750W
=
1250W =
2000W =
The heater will now start to heat the space.
If so desired, the fan (turbo) can be switched on for more rapid and more effective
heat distribution. Set the fan switch to I.
Setting the switch to O switches off the fan.
When the space has reached the desired temperature, turn the thermostat dial
anticlockwise slowly until you hear a click. In this position, the thermostat will maintain
the current temperature by turning the heater on and off for a top-up, if necessary. If
so desired, you can now switch to a lower power level. For higher temperatures, turn
the thermostat dial clockwise, for lower temperatures anticlockwise.
The heater can also be used as a fresh air fan. To do so, set the thermostat dial to its
maximum position, switch on the fan, but leave the mode selector dial on OFF.
To switch off the heater, first switch off the fan, then turn the mode selector dial to
OFF and unplug.
Safety features
Tipping safeguard
The heater is fitted with a tipping safeguard which automatically shuts off the appliance if
it inadvertently falls over. The heater will function as normal once it is returned to its
upright position but you are advised to switch if off, unplug and check it for damage
before using again. Do not use the heater in case of damage or malfunctioning. Have the
appliance inspected/repaired!
low power heating (750 Watt)
medium power heating (1250 Watt)
full power heating (2000 Watt)
27
Advertenties
Inhoudsopgave
