Advertenties
Beschikbare talen
Beschikbare talen
▶
Do not secure a belt hook to this power tool.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed accessories are secure.
▶
Do not look directly into the light source (LED) of the product and do not aim the beam at other persons' faces. Risk of dazzling or eye
damage.
▶
Keep the retaining strap and the tether clean and dry.
Electrical safety
▶
Before use of the cutting tool, all live cables and other equipment carrying electric voltage within the area in which the user is working are to
be switched off. If this is not possible, the corresponding safety precautions for working in proximity to electrically live cables or equipment
applicable in your country must be implemented and observed.
▶
Before beginning work, check the working area for concealed electric cables or gas and water pipes. External metal parts of the product
could give you an electric shock or cause an explosion if you accidentally damage an electric cable or a gas or water pipe.
Power tool use and care
▶
After approx. 50 consecutive cutting operations, switch the cutting tool off and allow it to cool down for about 15 minutes. Overheating can
lead to damage to the cutting tool.
▶
Store the cutting tool in a dry place inaccessible to children and unauthorized persons.
▶
Hilti recommends having the cutting tool overhauled by Hilti Service after 15,000 cutting operations.
Careful handling and use of batteries
▶
Comply with the following safety instructions for the safe handling and use of Li-ion batteries. Failure to comply can lead to skin
irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶
Use only batteries that are in perfect working order.
▶
Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely harmful to health!
▶
Do not under any circumstances modify or tamper with batteries!
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C (176 °F).
▶
Never use or charge a battery that has suffered an impact or been damaged in any other way. Check your batteries regularly for signs of
damage.
▶
Never use recycled or repaired batteries.
▶
Never use the battery or a battery-operated power tool as a striking tool.
▶
Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This can lead to explosions.
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects. This can damage the battery and
also cause material damage and personal injury.
▶
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits, electric shock, burns, fire and explosions.
▶
Use only chargers and power tools approved for the specific battery type. Read and follow the relevant operating instructions.
▶
Do not use or store the battery in explosive environments.
▶
If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning the QR code at the end of these
operating instructions.
Description
1
Product overview
Pivoting bar
@
Securing screw, cutting blade in pivoting bar
;
Securing screw, cutting blade in cutting head
=
Cutting head
%
Piston return switch
&
Servicing and fault indicator
(
Installation opening for accessories
)
Work-area light
+
Intended use
The product described is a cordless, electro-hydraulic cutting tool.
It is designed for cutting through cables made of steel (e.g. ACSR).
Before work commences, all live cables and other equipment carrying electric voltage within the area in which the user is working must
be switched off. If this is not possible, the corresponding safety precautions for working in proximity to live cables or equipment must be
implemented and observed.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance, Hilti recommends the batteries
stated in the table at the end of these operating instructions for this product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these operating instructions.
*2321709*
2321709
Control switch
§
Locking lever
/
Cutting blade in cutting head
:
Cutting blade in pivoting bar
∙
Battery status indicator
$
Battery release button
£
Battery
|
17
13
Advertenties
