Advertenties
Beschikbare talen
Beschikbare talen
Attention!
Pressing the switch twice serves as restart protection.
!
The restarting protection feature prevents uncontrolled re-
starting of the machine after an interruption in the power
supply. To restart the power tool, place the
To restart the operation, switch the On/Off switch to the
Off position and start the machine again by pressing the
switch twice.
Dust Extraction
Dust which occurs during your work is hazardous to health. That is why the
concrete grinder must be used with a vacuum cleaner, and a dust mask
has to be worn. The suitable Wet/Dry Vacuum Cleaner DSS 35 M iP is
available as accessory. It can directly be attached to the connection on the
dust hood.
When insert the suction hose pull the ring of the hose fixing and turn the
nozzle till the fixation engages.
Instruction for Use
Only use combinations of diamond grinding weels, concrete grinders with
mounted guard and extraction hood as well as dust category M vacuum
cleaners that are recommended by EIBENSTOCK. Other combinations can
lead to insufficient dust collection and separation.
Switch the machine on and put it carefully on the surface you want to work
on. Hold the tool with both hands and work with circular or linear
movements. For best working results: Don't put too much pressure on the
surface you want to work on. For grinding works right into edges of the wall
one segment of the dust guard can be removed by means of the chucking
device. This allows grinding on surfaces which are usually hard to reach.
The suction hose can be locked against
slipping out by means of the hose fixing.
Make the necessary drill hole as follows:
Put the suction hose in the connector of
the hood.
Mark the plug-in depth with a crayon
(see arrow).
Drill 9 mm from this marking (line) a hole
with diameter 6 mm in the nozzle.
17
Advertenties
