Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
GAS CONNECTION
The machine has a pneumatic connection. Use the adapters originally supplied with the power source.
LIQUID COOLING (201L)
FILLING THE DEVICE
The tank of the cooling unit must be filled to the recommended MAX level of the gauge on the back of the cooling unit, but never
below the MIN level, unless a warning message is displayed.
MAX
Use a coolant with low electrical conductivity, anti-corrosion and anti-freeze specific to welding machines (recommended coolant ref
052246).
To obtain the best cooling performance from this unit, distilled or demineralised water should be used. Please note that water can
only be used in ambient temperatures above 5°C.
The use of other coolants, and in particular standard automotive coolant, can lead to the accumulation of solid deposits in the coo-
ling circuit through electrolysis, thus degrading the cooling, and even blocking the circuit.
This recommended MAX level is essential to optimise the operating factors of the associated water-cooled torch.
MIN
Any damage to the machine caused by the use of a coolant other than the recommended type or distilled or demineralised water will
not be considered under the warranty.
HOW TO USE
NEVER USE the cooling unit WITHOUT COOLANT when the pump is running.
1.)
Respect the minimum coolant level. Failure to do so may result in permanent damage to the cooling system's pump.
Ensure that the cooling unit is switched off before disconnecting the liquid-cooled torch's inlet and/or outlet pipes. Coolant is hazardous and
2.)
irritates eyes, mucous membranes and skin. The hot liquid can cause burns.
3.)
Hot liquid burn hazard. Never drain the cooling unit after use. The liquid inside will be boiling, wait for it to cool down before draining.
The cooling unit must be switched off (OFF) to use an air-cooled TIG torch. For further instructions on how to do this, see page 25.
ACCESSORIES AND OPTIONS
Trolley
Trolley
201
201L
076341
041257
PROTIG 201 AC/DC - 201L AC/DC
Torch
201
201L
038271
038202
Manual remote control
045675
EN
Foot pedal
045682
21
Advertenties
Inhoudsopgave
