Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18 | English
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials without the use of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
(3) Auxiliary handle (insulated gripping surface)
(4) Combination wrench for M 14 grinding spindle
(5) Grinding spindle
(6) Protective guard for grinding
(7) Locking screw for protective guard
(8) Mounting flange with O‑ring
(9) Grinding disc
a)
(10) Clamping nut
(11) Quick-clamping nut
(12) Carbide grinding head
a)
(13) Protective guard for cutting
(14) Cutting disc
a)
(15) Hand guard
a)
(16) Rubber sanding pad
a)
(17) Abrasive disc
a)
(18) Round nut
a)
(19) Cup brush
a)
(20) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 7VR | (01.06.2022)
Technical Data
Angle grinder
Article number
Rated power input
Power output
Rated speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Restart protection
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary
– with standard auxiliary
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 93
dB(A); sound power level 104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
a)
determined according to EN 60745-2-3:
Surface grinding (roughing):
a
Disc sanding:
a
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
a)
tion.
The stated vibration level applies to the main applications of
a)
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
handle
handle
(triax vector sum) and uncertainty K
h
= 7.5 m/s
2
, K = 1.5 m/s
2
,
h
= 7.5 m/s
, K = 1.5 m/s
.
2
2
h
GWS 880
3 601 C96 0..
W
880
W
450
min
11,000
-1
mm
115/125
M 14
mm
22
●
kg
2.0
kg
1.9
/ II
Bosch Power Tools
Advertenties
Inhoudsopgave
