Download Inhoudsopgave Inhoud Print deze pagina

Cleaning The Airfry Tray; Stainless Steel Or Aluminium Ovens; Removing The Shelf Supports - AEG CCB6443BBM Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

mild detergent. Clean and check the door
gasket around the frame of the cavity.
• Use a cleaning solution to clean metal
surfaces.
• Clean stains with a mild detergent.
Everyday Use
• Clean the cavity after each use. Fat
accumulation or other residue may cause
fire.
• Do not store food in the appliance for
longer than 20 minutes. Dry the cavity only
with a microfibre cloth after each use.
Accessories
• Clean all accessories after each use and
let them dry. Use only a microfibre cloth
with warm water and a mild detergent. Do
not clean the accessories in a dishwasher
(except for AirFry tray).
• Do not clean the non-stick accessories
and AirFry tray using abrasive cleaner or
sharp-edged objects.

12.2 Cleaning the AirFry tray

1. Put the AirFry tray on the baking tray.
2. Pour hot water with detergent and let it
soak.
3. Clean the AirFry tray with a sponge or
use a brush to remove scraps.
Cleaning in the dishwasher is also possible.
12.3 Stainless steel or aluminium
ovens
Clean the oven door with a damp cloth or
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel with the
same precautions.

12.4 Removing the shelf supports

To clean the oven, remove the shelf supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
1
The retaining pins on the telescopic
runners must point to the front.
Install the shelf supports in the opposite
sequence.
CAUTION!
Make sure that the longer fixing wire is in
the front. The ends of the two wires must
point to the rear. Incorrect installation can
cause damage to the enamel.
12.5 How to use: Aqua clean
This cleaning procedure uses humidity to
remove remaining fat and food particles from
the appliance.
1. Pour water into the cavity embossment:
250ml.
2. Set the function
3. Set the temperature to 90 °C.
4. Let the appliance work for 30 min.
5. Turn off the appliance.
6. Wait until the appliance is cold. Dry the
cavity with a soft cloth.
2
.
ENGLISH
45

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave