Product description
Symbol
Meaning
Wear gloves.
Protect against moisture.
3.5
Safety and protective devices
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
Motor protection switch
The motor protection switch disconnects in the
case of overload. Hereby, switch (07/3) pops out
of the control panel. The switch can be pushed
back in again after a cooling-down phase of ap-
prox. 5 minutes, and the machine can be
switched on. If the switch does not remain by it-
self in the pressed position, extend the cooling-
down phase. If the problem continues to exist,
take the machine to a specialist workshop.
Restarting protection
For your safety, the machine is fitted with a 0
voltage switch, which automatically switches off
the machine in the case of a power interruption.
Once the voltage supply is re-established, the
machine does not restart automatically. Press the
On switch (07/1) to restart.
Protection switch on the upper shredder part
The shredder upper section is equipped with a
protection switch, which switches off if the closing
screw (01/8) is loosened. The motor is thus pre-
vented from unintentional starting.
The machine can only be switched on again
when the housing (01/1) has been fitted and the
closing screw tightened.
443093_c
3.6
Electrical requirements
3.6.1
Mains connection
DANGER! Risk of electric shock if the log
splitter is operated without residual current
circuit breaker. Operation of the appliance with-
out residual current circuit breaker in the mains
connection can result in serious injuries or even
death due to electric shock.
■
Before connecting the appliance, check
whether the mains connection has a residual
current circuit breaker for a maximum leak-
age current of 0.03 A.
■
If you cannot be sure that a residual current
circuit breaker is installed: Use an additional
portable residual current device with switched
PE conductor.
■
Mains voltage, see "Technical data". Do not
use any other mains voltage!
Only for Great Britain (240 V)!
■
This machine must be earth!
■
Never use a faulty power cable!
■
Check the power cable regularly for signs of
wear and tear!
Wiring instructions:
When wiring the English 3 pin plug, please follow
the instruction according to the colour coding as
shown below:
Green and yel-
low to termi-
nal
Brown to ter-
minal
Blue to termi-
nal
3.6.2
Mains cable
WARNING! Risk of injury from electric
shock. A defective mains cable can result in seri-
ous injuries due to electric shock.
■
Make sure that the mains cable is not dam-
aged or severed.
E
Earth
L
Live
N
Neutral
19