Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Original instructions
1. Declaration of Conformity
We declare under our sole responsibility: These
bench grinders, identified by type and serial number
*1), comply with all relevant requirements of the
directives *2) and standards *3). Technical file at *4)
- see page 4.
2. Specified Use
The grinders are suitable for dry, peripheral grinding
of metals - only in dry rooms and for occasional
grinding. The workpiece is guided by hand.
The belt sander (BS 175) is also suitable for dry
sanding of metal and derived wood products.
The dry/wet grinder (TNS 175) can also be used for
sharpening knives, chisels, shears and other cutting
tools, in addition to processing small metal
workpieces on the wet grindstone.
The grinders are not suitable for grinding
aluminium, magnesium or other materials
associated with a risk of fire or explosion.
Not suitable for polishing.
Not suitable for grinding materials that could
produce dust harmful to health.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
Operating mode S2 (30 min) refers to short-term
operation with a maximum operating time of 30
minutes. The unit must be switched off after 30
minutes and cool down.
3. General Safety Instructions
For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. Pass on your electrical tool only
together with these documents.
4. Special Safety Instructions
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are marked with
this symbol!
a) Do not use a damaged accessory. Before
each use, inspect the accessory such as
abrasive wheel for chips and cracks. After
inspecting and installing an accessory,
position yourself and bystanders away from
the plane of the rotating accessory and run the
power tool at maximum no-load speed for one
minute. Damaged accessories will normally break
apart during this test time.
b) The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool. Accessories running faster than
their rated speed can break and fly apart.
c) Never grind on the sides of a grinding wheel.
Grinding on the side can cause the wheel to break
and lfy apart.
The grinding wheel must match the machine.
Observe the maximum grinding wheel diameter and
thickness. The hole diameter must match the back
flange without play. Do not use adapters or
reducers.
Do not drill grinding wheels.
Do not trim grinding wheels.
The grinding wheels must be fitted perfectly and
turn freely.
Prior to using the grinding wheels, ensure that they
are free from defects. A sound inspection has to be
carried out to detect cracks.
Damaged, eccentric or vibrating or deeply furrowed
sanding discs must not be used.
When clamping the grinding wheels, only the
flanges included in the delivery must be used. The
intermediate layers between flange and grinding
tool must be made of elastic materials, e.g. soft
cardboard etc.
Protect grinding wheels against shocks, bumps and
grease.
Grinding discs must be stored and handled with
care in accordance with the manufacturer's
instructions.
Do not touch the rotating grinding wheel!
Always use the guard (7), the workpiece support
(8), the transparent guard/Eye preservers (9)
and the spark deflector (10) as required for the
tools;
Only work when the safety cover (1) and sanding
belt cover (16) are fitted.
Swivel the eye preservers (9) downwards before
grinding.
Use the perimeter (not the sides) of the grinding
wheels for grinding.
ENGLISH en
11
Advertenties
Inhoudsopgave
