Victron energy BlueSolar PWM DUO-LCD-USB Handleiding pagina 7

Inhoudsopgave

Advertenties

Beschikbare talen

Battery2 display: battery2 voltage, battery state of charge,

charging status.

Press MENU

to enter next display.

PV Voltage display: PV voltage and the state of charge of the

batteries.

Press MENU

to enter next display.

Charge current display: Total PV to batteries1&2 current and the

state of charge of the battery.

If arrow is flashing charger is in float.

Press MENU

to enter next display.

USB Voltage display: USB voltage

5V (2A max)

Press MENU

to enter next display.

Internal controller temperature. If the

DUO 12V|24V|20A LCD-USB

down and wait for the temperature to drop to normal level and

then it will start working again.

Press MENU

to enter next display.

External Temperature Sensor temperature. If the external

temperature sensor is connected, battery absorption voltages will

corrected with -30mV/°C for 12V and -60mV/°C for 24V

Without sensor the temperature is 25°C

Press MENU

to enter Main display.

For use with External Temperature Sensor connect the sensor to

the

BlueSolar PWM DUO 12V|24V|20A

BlueSolar PWM

gets hot during running it will shut

Inhoudsopgave

Advertenties

Inhoudsopgave