Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CAUTION:
·
Appliances are tested following production. It is thus perfectly normal if droplets of condensation have
formed in the water tank.
·
During the first use it is normal that a specific odour escapes from the appliance. This odour will
disappear after a while.
·
Some particles may come out of the soleplate during the first use. This is normal. The particles are
harmless and will disappear after a while.
·
While the soleplate is heating up, some steam will be released automatically. This is also normal and
will last for about 3 seconds.
USE
This steam station offers 2 options: dry ironing or steam ironing. Follow the instructions below. Also
carefully read the ironing tips at the end of this section before using the appliance.
DRY IRONING
1.
Place the iron on the thermal insulation pads of the steam station.
2.
Put the plug into the outlet. Select the desired temperature with the
temperature dial, according to the kind of fabric that needs to be
ironed. The iron will start to heat up. The temperature indicator light will
light up.
3.
When the temperature indicator light goes out again, the selected
temperature has been reached. You can now start ironing.
4.
After ironing, place the iron on the thermal insulation pads. Turn
the temperature dial back to "MIN" to turn off the appliance. The
temperature indicator light will now go out. Pull the plug out of the socket. Allow the appliance to
cool down completely.
Caution: Never touch the hot soleplate!
STEAM IRONING
Caution: do not plug in the appliance yet at this point.
1.
Fill the water tank with water. Make sure that you do not exceed the maximum level (1.2 L). Use only
mains water or 50 % mains water and 50 % de-mineralised water if you have hard water.
2.
Replace the water reservoir in the appliance. You will hear a click when the reservoir is correctly
positioned in the appliance. If the reservoir is not correctly positioned in the appliance, it will not
work.
3.
Place the iron on the thermal insulation cushions. Put the plug into the
outlet. Set the temperature dial to the desired temperature, according
to the kind of fabric. The temperature indicator light will light up.
4.
When the temperature indicator light goes out again, the appliance has
reached the correct temperature.
5.
To iron with steam, press the steam button on the inside of the iron's
handle. A continuous flow of steam will come out of the sole. When you
release the button, you will iron dry, without steam.
6.
Please note:
·
Do not touch the hot sole of the iron!
·
Never aim steam at people!
26
DO7114S
Advertenties
Inhoudsopgave
