Download Inhoudsopgave Inhoud Print deze pagina
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 3
· Check carefully that the voltage and frequency of the power net
match the indications on the rating label of the appliance.
· The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local standards and
requirements.
· Only use the utensils delivered with the appliance.
· To protect against electrical shock or burns, do not immerse unit,
cord, or plug in water or other liquid.
· Do not operate the appliance with wet hands.
· Unwrap the cord completely to prevent overheating of the cord.
· Do not let the power supply cord touch hot surfaces.
· Only fill the water reservoir with no other liquid than water.
· Make sure the appliance is correctly assembled, then plug the
cord in the wall outlet. To disconnect, turn controls to "OFF" or "0"
position, then remove the plug from the wall. Never pull the cord or
appliance to remove the plug from the socket.
· Make sure the appliance has cooled down before opening the boiler
for cleaning. Make sure the bolt of the boiler is correctly and well
fixed onto the appliance after maintenance.
· Failure to maintain this appliance in a clean condition could
adversely affect the life of the appliance and possibly result in a
hazardous situation.
· Any injury or damage caused by failure to comply with these rules
are at your own risk. Neither the manufacturer, importer, or the
supplier may be held liable.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
PARTS
1.
Filling opening
2.
Water tank
3.
Temperature indication light
4.
Temperature dial
5.
Soleplate
6.
Thermal insulation pads
7.
Cable storage

BEFORE THE FIRST USE

·
Remove any stickers or protective foil from the soleplate.
·
Heat up the iron until the maximum temperature and iron on a damp cloth during a couple of minutes
to remove any possible residues from the soleplate.
www.domo-elektro.be
1
2
7
3
4
5
6
25
DO7114S

Advertenties

Inhoudsopgave
loading

Inhoudsopgave