Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SmartHandle AX Advanced Scandinavian Oval
Adapter sleeve, 8.5 mm spindle
Adapter sleeve, 10 mm spindle
4. Structure
1
5. Installing the fitting
Door pre-drilled.
ü
PH2 screwdriver at hand.
ü
TX15 screwdriver at hand.
ü
ü
Caliper gauge at hand.
ü
For MO: cylinder is already fitted.
1.
Look at the mortise lock from the outer side and insert the sleeve nuts
for the mortise lock into the fastening plate.
2
3
2.
For 7 mm spindle: Insert the adapter shoe into the spindle mount on the
module support.
4
3.
Insert the module support into the fastening plate.
5
4.
Slide the module support downwards.
6
9
Module support snaps into place.
5.
Fasten the module support to the fastening plate (PH2) with the 12 mm
screws.
7
8
6.
Insert the module support with the fastening plate into the outer side of
the door.
9
7.
For non-MO: Insert the sleeve nuts into the MO cover.
8.
Insert the sleeve nuts into the fastening plate.
10
9.
Firmly fasten the cylinder escutcheon to the sleeve nuts (PH2).
11
12
13
14
15
10. For 7 mm spindle: Place the adapter sleeve in the inside handle in such a
way that the recess faces the grub screw.
16
11.
Determine the required direction of rotation for your inside handle.
12.
Place the interchangeable plate into your inside handle escutcheon as
required.
17
18
13.
Pre-tension the spring element on the interchangeable plate.
19
14. Slide the spring element nose into the slot in the escutcheon.
20
15.
Attach the end of the spring element into the slot in the escutcheon.
21
EN
16. For 8.5 mm and 10 mm spindle: slide the adapter sleeve into the centre
of the spindle. Use a punch and hammer to make an indent in the ad-
apter sleeve to prevent it from slipping.
22
23
17.
Measure the door thickness.
24
18. Measure the total length of the spindle.
25
19. Locate the inside of the spindle (four-edge end up to the centre of the
first groove = 26 mm).
20. Use the table to determine the position of the O-ring.
26
Door thickness
Area
(mm)
S
32 – <36
S
32 – <36
S
36 – <41
S
36 – <41
S
41 – <46
S
41 – <46
S
46 – <51
S
51 – 54
M
52 – <56
M
52 – <56
M
56 – <61
M
56 – <61
M
61 – <66
M
61 – <66
M
66 – <71
M
71 – 74
L
72 – <76
L
72 – <76
L
76 – <81
L
76 – <81
L
81 – <86
L
81 – <86
L
86 – <91
L
91 – 94
21.
Slide the O-ring onto the calculated groove.
27
22. Insert the spindle into the door with the ring-free side as far as it will go.
28
23. Place the inside handle unit on the spindle.
24. Firmly screw the inside handle unit onto the sleeve nuts (PH2).
11
12
13
32
25. Position the cover on the fastening plate at the bottom.
33
4. Structure
Spindle length
Ring position
(mm)
84
3
94
5
84
2
94
4
84
1
94
3
94
2
94
1
104
3
114
5
104
2
114
4
104
1
114
3
114
2
114
1
124
3
134
5
124
2
134
4
124
1
134
3
134
2
134
1
29 / 52
Advertenties
Inhoudsopgave
