Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.17 Change control signal range
0-10V Range(1-3)
select
This function determines when the 0 – 10VDC signal is modulated back in conditions of heat
demand. When set to 1.0, the PinTherm Connect will start to modulate the 0 - 10V signal at 1K
below the target temperature.
The range can be set between 0.5 – 3.0 and is set to 1.0 as standard.
5.18 ModBus
MODBUS SETTINGS
select
Slave ID: adjustable 1 - 247
Factory setting: 1
5.19 Ethernet Info
ETHERNET INFO
select
Display set IP address.
0-10V Range(1-3)
1.0
OK
change setting
MODBUS SETTINGS
001
OK
IP ADDRESS
192.168.001.100
OK
OK
back to
the menu
OK
back to the
menu
changes the
flashing digit
to go one digit up
MAC ADDRESS
5410EC220037
OK
EN
OK
back to the
menu
13
Advertenties
Hoofdstukken
Inhoudsopgave
