Safety Instructions - Victron energy BlueSolar MPPT 75/10 Handleiding

Verberg thumbnails Zie ook voor BlueSolar MPPT 75/10:

Inhoudsopgave

Advertenties

Beschikbare talen

2 Safety instructions

Danger of explosion from sparking

Danger of electric shock

● It is advised to read this manual carefully before the product is installed and put into

use.

● This product is designed and tested in accordance with international standards. The

equipment should be used for the designated application only.

● Install the product in a heatproof environment. Ensure therefore that there are no

chemicals, plastic parts, curtains or other textiles, etc. in the immediate vicinity of the

equipment.

● Ensure that the equipment is used under the correct operating conditions. Never

operate it in a wet environment.

● Never use the product at sites where gas or dust explosions could occur.

● Ensure that there is always sufficient free space around the product for ventilation.

● Refer to the specifications provided by the manufacturer of the battery to ensure that

the battery is suitable for use with this product. The battery manufacturer's safety

instructions should always be observed.

● Protect the solar modules from incident light during installation, e.g. cover them.

● Never touch uninsulated cable ends.

● Use only insulated tools.

● Connections must always be made in the sequence described in section 3.5.

● The installer of the product must provide a means for cable strain relief to prevent the

transmission of stress to the connections.

● In addition to this manual, the system operation or service manual must include a battery

maintance manual applicable to the type of batteries used.

Inhoudsopgave

Advertenties

Inhoudsopgave

Bluesolar mppt 75/15