Advertenties
Beschikbare talen
Beschikbare talen
USING
If the label says "do not iron" or shows this icon i, fit the delicate attachment and make sure to test
•
on an inconspicuous area prior to steaming the entire garment.
•
If the label says "do not steam" or shows this icon
1.
Hang the garment in an area that will not be affected or damaged by the heat and steam, such as on
a shower curtain rail, or in an open doorway.
2.
Fit any attachment you wish to use.
3.
Plug the steamer in then press the power button. The power button light will slowly flash blue,
indicating that the steamer is heating and on the delicate steam setting.
4.
After about 45 seconds the power light will stay on, indicating the steamer is preheated.
5.
Prime the water pump by holding steam trigger until steam forms.
6.
To generate steam, press the steam trigger. As long as the trigger is held, steam will emit from the
steamer. When the trigger is released, the steam will stop.
•
To generate a constant flow of steam without holding the trigger, press the steam trigger and then
slide the steam trigger lock downwards. You can then release pressure on the steam trigger. To turn
the steam off, press the trigger, slide the steam trigger lock upwards, then release the trigger.
7.
With your free hand keep the fabric taut. Steam the garment with slow, downward strokes, keeping
the head of the steamer in contact with the fabric.
8.
When you have finished, press and hold the power button until the blue light goes out (about 3
seconds) and unplug.
9.
Stand the steamer on its base and allow it to completely cool off before storing. To avoid mineral
buildup, empty the tank after each use.
Steam Settings
Your steamer has two steam settings delicate and turbo. The delicate steam setting (v) can be used on
delicate fabrics, embellishments and details like beads and sequins. The turbo steam setting (x) can be
used on stubborn creases, jeans, upholstery and harder to wash fabrics.
•
To activate the turbo setting, press the steam trigger twice in quick succession. The power button
will change to green to show that your steamer is in turbo setting.
•
To deactivate and return to the delicate steam setting, press the steam trigger twice in quick
succession. The power button will change to blue to show that your steamer is in the delicate steam
setting.
Ceramic heated plate
Your steamer features a ceramic heated plate that helps smooth out wrinkles and creases on the areas of
garments that are more difficult to reach with steam alone. The temperature of the plate is safe for all
ironable fabrics.
To use, hold the plate of the steamer directly against the fabric. Don't fit any of the attachments. Steam the
garment with slow, downward strokes while keeping the plate in contact with the fabric.
Auto shut off
Your steamer will automatically switch to auto shut-off mode after being left inactive for 15 minutes. The
power button light will flash rapidly to indicate this. To resume steaming, press the steam trigger or power
button and wait for your steamer to fully reheat.
CARE AND MAINTENANCE
1.
Make sure steamer is off, unplugged and completely cool.
2.
Wipe all surfaces with a clean damp cloth.
3.
After the steamer has been thoroughly dried, turn it back on and lightly steam over an old cloth. This
will help remove any residue left in the steam holes.
4.
To avoid mineral buildup, empty the tank after each use.
Cleaning attachments
•
Delicate fabric attachment: Wash with cold water and small amounts of a gentle cleanser if needed.
The fabric cannot be removed.
•
Upholstery attachment: The fabric can be removed and hand washed with cold water and a gentle
m
, do not steam the garment.
5
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
Advertenties
